Ready to use — no dilutionDescription
A ready to use polish that cuts light swirls, oxidation and water spotting, then refines to a high gloss finish in a single step.
Where to use it
- •Dull or swirled paintwork
- •Faded single stage paint
- •Machine or hand polishing
- •Pre-wax paint prep
How to use it
- 1.Wash, decontaminate and dry the vehicle first.
- 2.Apply 3–4 pea sized drops to a foam pad or applicator.
- 3.Work a small section at a time with light pressure until the product goes clear.
- 4.Buff off residue with a clean microfibre, then protect with Wet Wax or Hydro Foam & Seal.
Typical amount to use
Roughly 30–50 ml for a full car.
Safety advice
- •Never work on hot panels or in direct sunlight.
- •Take care on edges and thin paint — check paint depth if unsure.
- •Keep off plastic trim; mask where needed.